Welcome to the Hydraulic Press Channel Today we have very really interesting video We are going to test which is stronger Aluminium rim, or steel rim and the idea is pretty simple, We are going to just put the rim and the tire in the press and then we will crush them and see how much pressure it takes and then we can calculate the force the we needed to crush the rims and this video is done in cooperation with with Valtavalo They gave new LED tubes for our workshop, and I also have couple of as in filming lights They should be really good filming lights because they have good color rendering index and, they don’t flicker at all. If you want to learn more about the lights, I have video on BeyondThePress Channel where we change the lights to our workshop and do some tests with high speed camera at the lights and, they don’t really flicker at all on any frame rate and we are also going to use our Chronos 1.4 high speed camera today And I really like my new setup where the lights are attached to the blast screen They give really soft light because they are so large compared to my old spotlights… so Nice to see how the picture is going to look today Yea! But, uh let’s start with the aluminium rim I think this is going to be harder than the steel rim, but Let’s find out. And this is really dangerous, don’t ever try anything like this at home *Press noises* And here we go! *Air escapes and tire pops* Yeah it broke from the back And from the front, so I think that’s finished And I don’t know what was the big pressure But, it was this amount of force I see to the edit Yup, and I don’t know how strong it was, but I think it wasn’t like stupid strong Aaand I’m bit disappointed it first broke in the back But I have more of these So I’m going to switch new one there And then we are going to crush it again So you can see how it breaks from the behind But, eh, let’s check the damage from this one And I think we are going to use this one as in like reference on the force, so here is the end result It’s pretty broken

STEEL Vs. ALLOY WHEELS Which One Is Stronger? Hydraulic Press Test!

100 thoughts on “STEEL Vs. ALLOY WHEELS Which One Is Stronger? Hydraulic Press Test!

  • October 20, 2018 at 1:29 pm
    Permalink

    Thanks for new lights to Valtavalo! They are really good and really well suited to for our filming use thanks to good CRI and absence of any flickering! For more information about G4 LED tubes https://valtavalo.fi/tuotteet/g-sarja/g4-led-valoputket/?lang=en or our video https://youtu.be/x5qEHxMyaNs
    And here is video about Valtavalo as an company and some footage of their ultra modern factory https://youtu.be/HePxS8OUNsM

    Reply
  • May 29, 2019 at 9:32 am
    Permalink

    Imagine everything you can do with the power of

    FLEX TAPE

    Reply
  • May 29, 2019 at 11:42 am
    Permalink

    I have tried it at my work

    Reply
  • May 29, 2019 at 12:32 pm
    Permalink

    I have tried the same experiment in my kitchen with industrial press….😉😉😉😉

    Reply
  • May 29, 2019 at 4:20 pm
    Permalink

    Can you please use translate I am a American I cannot understand you

    Reply
  • May 29, 2019 at 7:14 pm
    Permalink

    R. I. P squirrel 😢

    Reply
  • May 29, 2019 at 9:01 pm
    Permalink

    Thank God you saved the world from that deadly animal.

    Reply
  • May 29, 2019 at 11:36 pm
    Permalink

    8:15 the most satisfying slo mo in the world

    Reply
  • May 30, 2019 at 2:14 am
    Permalink

    You need to do this on a rim with a 0 offset so the mounting flange/ face of the rim is in the center of the rim, not right at the front. There’s no support directly under where the press is pushing down. Try it on a 3/4 or 1 ton truck rim that has a load rating of 2500-3000 lbs, not some flimsy old car rim…

    Reply
  • May 30, 2019 at 3:09 am
    Permalink

    Why you pressed that crocodile☹️☹️☹️☹️☹️😢

    Reply
  • May 30, 2019 at 9:32 am
    Permalink

    I will try it by putting my iPhone x s..

    Reply
  • May 30, 2019 at 2:24 pm
    Permalink

    Lol he made a split rim

    Reply
  • May 30, 2019 at 2:36 pm
    Permalink

    You should test truck’s rim

    Reply
  • May 30, 2019 at 7:58 pm
    Permalink

    16” rims mint condition no low ballers.

    Reply
  • May 30, 2019 at 10:05 pm
    Permalink

    Blablablablablablablabla

    Reply
  • May 31, 2019 at 6:47 am
    Permalink

    Yes don't crush car tires with your hydrolic press that you have an home

    Reply
  • May 31, 2019 at 9:46 am
    Permalink

    Yang punya kontol likee

    Reply
  • May 31, 2019 at 10:29 am
    Permalink

    can you do some hydraulic press vs. hydrualic press? hahahaha

    Reply
  • May 31, 2019 at 1:34 pm
    Permalink

    Please try aluminium racing wheel VS forged racing wheel

    Reply
  • May 31, 2019 at 2:08 pm
    Permalink

    So which one is stronger ????

    Reply
  • May 31, 2019 at 2:24 pm
    Permalink

    Mentally retarded guy wasting fresh and quite new tyres for an experiment which cud have been used by someone else who cant afford new tyres. May be u ppl r getting things free of cost or without much hard work or efforts thats y u dont value them….

    Reply
  • May 31, 2019 at 3:42 pm
    Permalink

    Ow ho ho ho ho how até que enfim útil que aborda a questão do peso e da escolha final na compra do produto

    Reply
  • May 31, 2019 at 8:30 pm
    Permalink

    I love his accent ! Benny Hill is talking…

    Reply
  • June 1, 2019 at 8:51 am
    Permalink

    Is the alloy rim is made out of steel or aluminum? Well I’m assuming steel but idk honestly 🤷‍♂️

    Reply
  • June 2, 2019 at 7:13 am
    Permalink

    -its pretty broken
    – nah it'll buff out

    Reply
  • June 3, 2019 at 5:12 am
    Permalink

    Steel rims are always stronger than alloy rims,no question.

    Reply
  • June 4, 2019 at 5:06 pm
    Permalink

    I cant try this at home, becouse i dont have this big things in my house

    Reply
  • June 5, 2019 at 3:58 am
    Permalink

    Yup alloys are better and as for steel,it was already rusted.

    Reply
  • June 6, 2019 at 1:22 pm
    Permalink

    Меня одного напрягает его жуткий акцент?)) Притом что я плохо знаю язык))

    Reply
  • June 7, 2019 at 8:29 pm
    Permalink

    Interesting but I would like to flag that there are many material performance properties important for a wheel, like impact strength and ductility. Areas where the steel wheel is superior.

    Reply
  • June 11, 2019 at 5:07 pm
    Permalink

    Alloy 1:45 steel 5:21

    Reply
  • June 12, 2019 at 1:55 am
    Permalink

    In Mexico, those wheels are still usable.

    Reply
  • June 12, 2019 at 5:03 am
    Permalink

    There's a reason why cop cars use steel wheels. Aluminum wheels would shatter if they had to drive the car over a curb.

    Reply
  • June 13, 2019 at 7:21 pm
    Permalink

    Музон в начале был многообещающи

    Reply
  • June 13, 2019 at 8:48 pm
    Permalink

    It is aluminum not alaminum

    Reply
  • June 14, 2019 at 7:15 pm
    Permalink

    The most depressing video ever…

    Reply
  • June 17, 2019 at 9:08 am
    Permalink

    3:54 – aaahhhhhhhhhhhhhhh

    Reply
  • June 17, 2019 at 2:21 pm
    Permalink

    you need to speak ENGLISH

    Reply
  • June 17, 2019 at 8:21 pm
    Permalink

    I always thought this guy was an old machinist that loved smashing things

    Reply
  • June 18, 2019 at 4:49 am
    Permalink

    FTV Buco ugg

    Reply
  • June 19, 2019 at 2:06 am
    Permalink

    Next vid my head I wanna live no more

    Reply
  • June 19, 2019 at 4:02 am
    Permalink

    😱😱

    Reply
  • June 19, 2019 at 5:25 am
    Permalink

    How

    Reply
  • June 19, 2019 at 6:22 am
    Permalink

    Cast aluminum just breaks, and steel just keeps on bending. Pretty much consistent with what i've found with doing basic metal work. Can't say i've ever put anything in a hydraulic press and tried to break it tho 😆

    Reply
  • June 19, 2019 at 9:49 pm
    Permalink

    This doesnt show anything i drove big rigs 42 yrs ive actualy had more steel wheels crack over the years than aluminum

    Reply
  • June 20, 2019 at 9:19 pm
    Permalink

    Next you need to get a 3 piece rim they are supposed to be a lot stronger than standard 1 and 2 piece rims

    Reply
  • June 21, 2019 at 9:47 pm
    Permalink

    Beeehiiind

    Reply
  • June 22, 2019 at 5:24 am
    Permalink

    i'll heard the voice of owak

    Reply
  • June 22, 2019 at 12:57 pm
    Permalink

    Amazing!!!

    Reply
  • June 23, 2019 at 3:46 pm
    Permalink

    Still strong

    Reply
  • June 24, 2019 at 11:10 am
    Permalink

    I Will try in my home…..i sleep in factory.

    Reply
  • June 26, 2019 at 10:40 am
    Permalink

    말 더럽게 많네…

    Reply
  • June 29, 2019 at 5:54 am
    Permalink

    Alloy > Steel

    Reply
  • June 29, 2019 at 10:00 am
    Permalink

    I had to throw away my 20 ton hydraulic press because it couldn't break the steel wheel.

    Reply
  • June 29, 2019 at 10:54 pm
    Permalink

    5/5 👍 mikä on kallein juttu mitä oot puristanut paskaksi?

    Reply
  • June 30, 2019 at 5:34 am
    Permalink

    Comrad !! …comrad………………….

    Reply
  • June 30, 2019 at 5:48 am
    Permalink

    "You are terminated, fu**er!"

    Sarah Connor

    Reply
  • July 1, 2019 at 12:55 am
    Permalink

    I freaking love you guys. Your channel is so educational. Thank you, and when your girl makes comment in background I smile every time. You are super couple! 🙂

    Reply
  • July 1, 2019 at 12:58 pm
    Permalink

    Don't try this home
    Like u everyone has a hydraulic press at home

    Reply
  • July 4, 2019 at 6:40 pm
    Permalink

    Hydraulic press guy: don’t try this at home!

    Me: Yeah cause I totally have a hydraulic press and tires to spare

    Reply
  • July 6, 2019 at 9:04 am
    Permalink

    Suomi🇫🇮

    Reply
  • July 11, 2019 at 2:22 pm
    Permalink

    That English

    Reply
  • July 13, 2019 at 11:46 pm
    Permalink

    what a good speaking you are

    Reply
  • July 14, 2019 at 9:27 am
    Permalink

    Your tongue never leaves Rrrrrrrrr pronounce😂🤣🤣🤣

    Reply
  • July 14, 2019 at 2:38 pm
    Permalink

    Very good and very nice bro

    Reply
  • July 14, 2019 at 3:27 pm
    Permalink

    What did he say???

    Reply
  • July 18, 2019 at 4:04 am
    Permalink

    Subrcibe to me and shout out to sub to me

    Reply
  • July 19, 2019 at 8:19 pm
    Permalink

    3:21 a serious butthole ?

    Reply
  • July 22, 2019 at 4:28 am
    Permalink

    More like “don’t drive this at home”

    Reply
  • July 24, 2019 at 6:23 pm
    Permalink

    Once try u'r Head or hand….it would be great

    Reply
  • July 27, 2019 at 12:47 am
    Permalink

    You should try a bead lock

    Reply
  • July 27, 2019 at 8:12 am
    Permalink

    Don't worry… No one's got these kind of machine at home to try

    Reply
  • July 29, 2019 at 4:23 am
    Permalink

    BTW … steel is an alloy too! Note that adding an element to another metal will immediately make the resulting material an alloy.

    Reply
  • July 30, 2019 at 11:47 pm
    Permalink

    U talk to much, just get to the pressing

    Reply
  • August 5, 2019 at 3:33 pm
    Permalink

    I really think there are better ways to change a tire. This method could seriously affect your repeat business.

    Reply
  • August 5, 2019 at 6:18 pm
    Permalink

    Please don't try this at home me at home "dam it" Mom turn off the press not going do this one

    Reply
  • August 8, 2019 at 12:13 pm
    Permalink

    The wheel must be for same car

    Reply
  • August 10, 2019 at 8:33 am
    Permalink

    Bhosdike lode kuute ki olad bhenchod gaan maru tari.loda

    Reply
  • August 10, 2019 at 7:04 pm
    Permalink

    Should try powder a coated alloy and a non powder coated alloy..apparently it weakens them.

    Reply
  • August 12, 2019 at 1:14 am
    Permalink

    I know a real good shop they restore wheels back to original order, 100%safe to use again :p

    Reply
  • August 12, 2019 at 7:34 am
    Permalink

    when I hit a pothole in my Mustang GT 1:51

    Reply
  • August 12, 2019 at 8:50 am
    Permalink

    This test isn’t proper. The load distribution on wheels of automobiles is obviously not like this 😑

    Reply
  • August 13, 2019 at 12:01 am
    Permalink

    I loved this guy on Sesame Street.
    I can Count to ten because of him.

    Reply
  • August 13, 2019 at 12:01 am
    Permalink

    I loved this guy on Sesame Street.
    I can Count to ten because of him.

    Reply
  • August 17, 2019 at 1:02 am
    Permalink

    In a wheel , strong is important but the weight is important too. The lighter your car wheels can be , the better it is for the engine , the need of fuel etc….

    Reply
  • August 19, 2019 at 2:35 pm
    Permalink

    hehe you sound like the guy from the game hydraulic press pocket. great video 😊😊

    Reply
  • August 22, 2019 at 7:39 am
    Permalink

    Why are the lights on the wrong side of the blast screen they are getting shattered to fuck if anything blows

    Reply
  • August 27, 2019 at 1:35 am
    Permalink

    I really enjoy your videos. Just thought I'd say that and I've been watching them for a couple years now. Your hydrologic press is extremely powerful I don't think many of your subscribers has one string enough and or can afford one strong enough to do alot of the stuff you do with yours and of they can they can't afford to fix it if it breaks so I don't think you need to worry exactly about any of us trying this at home.

    Reply
  • September 2, 2019 at 1:18 pm
    Permalink

    I would love to see Donald Trump vs. a piece of dog shit in your press, let's pay a flight ticket for him and see how well he does.

    Reply
  • September 2, 2019 at 8:36 pm
    Permalink

    9:09 How to make deep dish Steelies
    Use an hydraulic press with 20 tons force

    Reply
  • September 12, 2019 at 2:41 am
    Permalink

    Not everyone can afford a hydraulic press for household purposes.

    Reply
  • September 12, 2019 at 9:33 am
    Permalink

    3:52 sounds of Hell 😀

    Reply
  • September 13, 2019 at 6:24 am
    Permalink

    u wanta c des

    Reply
  • September 14, 2019 at 6:38 pm
    Permalink

    It’s made of gooooooold!

    Reply
  • September 15, 2019 at 12:41 am
    Permalink

    Nice

    Reply
  • September 16, 2019 at 2:58 pm
    Permalink

    The Press surface area should be larger to share the load evenly ……

    Reply
  • September 19, 2019 at 11:19 pm
    Permalink

    How many feet is one ton

    Reply
  • September 21, 2019 at 10:53 am
    Permalink

    Kamara😂😂

    Reply
  • September 24, 2019 at 2:26 pm
    Permalink

    Crushed i phone 11 pro

    Reply

Leave a Reply

Your email address will not be published. Required fields are marked *