23 thoughts on “Making The Wedgie Sled

  • June 19, 2019 at 3:24 pm
    Permalink

    Where can I buy one of Jerry's sleds with wedgie's ?

    Reply
  • June 19, 2019 at 3:24 pm
    Permalink

    Very good video just built a sled and it works great thanks

    Reply
  • June 19, 2019 at 3:24 pm
    Permalink

    do you use open wedgies or close one for this jig

    Reply
  • June 19, 2019 at 3:24 pm
    Permalink

    Cheers Dave for posting and of course a big thanks to Jerry Bennett the designer.  I'm off out to the workshop now to get on with the build.The instructions are in-depth and precise, thanks again for the post and sharing, regards and best wishes to you both (Jerry and Dave).

    Reply
  • June 19, 2019 at 3:24 pm
    Permalink

    Absolutely perfect instructions!

    Reply
  • June 19, 2019 at 3:24 pm
    Permalink

    Thank you so much for your instruction time and doing this in such detail. This is most helpful for me and many others watching I'm sure!

    Reply
  • June 19, 2019 at 3:24 pm
    Permalink

    Great video. I've looked through all the comments and can't find my answer. How do you regulate the length of the wedge to be cut?

    Reply
  • June 19, 2019 at 3:24 pm
    Permalink

    do you sell a pre made sled along with a set of wegies

    Reply
  • June 19, 2019 at 3:24 pm
    Permalink

    Wow… very good video about this topic!!!

    Reply
  • June 19, 2019 at 3:24 pm
    Permalink

    What a great Video! all information there and very informative. thank you for your time and effort.. I will build this.

    Reply
  • June 19, 2019 at 3:24 pm
    Permalink

    Very well explained tutorial.
    Thanks
    James

    Reply
  • June 19, 2019 at 3:24 pm
    Permalink

    President of Segmentology Mr Jerry Bennett

    Reply
  • June 19, 2019 at 3:24 pm
    Permalink

    Thank You for providing a straight forward lesson on building a segue sled.

    Reply
  • June 19, 2019 at 3:24 pm
    Permalink

    I have made my wedgie sled, but there seems to be no plans for the saw stop. Are there any or a video to help me?

    Reply
  • June 19, 2019 at 3:24 pm
    Permalink

    Where to buy the wedgies? Or is these not something that is for the public?

    Reply
  • June 19, 2019 at 3:24 pm
    Permalink

    Dave,
    Excellent video. Very thoughtfully crafted, and flawless presentation. Using a 30/60/90 triangle I made a perfect 12 segment ring. Easy breezey.
    Thank you,
    Ed W

    Reply
  • June 19, 2019 at 3:24 pm
    Permalink

    jerry es un genio……..cabezon…

    Reply
  • June 19, 2019 at 3:24 pm
    Permalink

    Thank you for your prompt and helpful response. I am currently using my bandsaw with the sled to cut my wedge segments. I find this is not so aggressive as a bandsaw and todate my first ring came out perfectly without any sanding etc. There are two questions, i) using the outside of the fences when you need wider segments – do they cut the angle accurately still, and b) would you agree that using a bandsaw is considerably saver than a circular saw, albeit any machine needs to treated with respect.
    Thanks again
    KR
    Gary Smith

    Reply
  • June 19, 2019 at 3:24 pm
    Permalink

    Hi When making the sled is it okay to have a larger gap between the fences so you could use 3" timber or larger. Alternatively is the sled still accurate if you cut the wedges using the outside of the fences which would enable you to cut bigger wedges. Excellent video and concept. Many thanks
    Gary Smith

    Reply
  • June 19, 2019 at 3:24 pm
    Permalink

    very well done video, thanks

    Reply
  • June 19, 2019 at 3:24 pm
    Permalink

    is there a reason why people use MDF instead of particle bord or plywood?

    Reply
  • June 19, 2019 at 3:24 pm
    Permalink

    I made one today and the segments turned out perfect. A well explained video.

    Reply
  • June 19, 2019 at 3:24 pm
    Permalink

    Thanks for the vid. It might be a good idea to harden the holes & slots with a coat of CA glue.

    Reply

Leave a Reply

Your email address will not be published. Required fields are marked *