imagine there’s a liner that when
you put it in without doing anything just with the temperature of your body
will adjust your foot Olá youtube, My name is Ricardo lino and I’m a Wheel Addict.
today I’m going to talk to you about the recall liner from MYFIT and what’s
different with the recall liner from MYFIT, imagine there’s a liner that when
you put it in without doing anything just with the temperature of your body
will adjust your foot then once you take it out it goes back to what it was
before basically it’s I think it has memory foam I think that’s the name of
it so basically you put it in temperature of your body will make these
adapt to your foot, but if you have any pressure point on your skates and you
need any major changes you can put these in the oven for 5 minutes 100 degrees
and then keep that form at this make sense I don’t know if this makes sense I
don’t know if I can explain these but it’s something like every time you put
it in it adapts to your foot if you need major changes you put these in the oven
for 5 minutes 100 degrees and molded with your hands do whatever you need any
pressure point that you have on your skates these should work what’s
different between the MYFIT recall liners and the older models this liner
looks a lot to the crown liner I made a few reviews about the crown liner I’m
going to put it up here main difference whoops with the crown liner for you to
have laces you would need to use that cuff kind of like that insert that you
can put in the back that would make the liner a lot bigger a lot better in the
back and then that thing will give you the laces that you would need on liner
this one as the lacing system in the liner itself this one doesn’t have the
same velcro system that the crown liner add for you to put it the shock absorber
but a little bit of silicone and this silicone is supposed to keep the liner
stuck in the back also on the sides in the hill
and here there’s a little bit of silicone and these silicone here here
and here is supposed to keep the heel of the liner back in the back of the skate
and this is really really important because when you want to jump you don’t
want the liner to do this inside the schedule please part to be in the skate
of course it depends on the skate and these will work even better if you have
like a 45 degree strap or if you have something old in your suit in the right
position basically the liner will stay there now you also want your food to
stay there that’s where the lacing system will also help you that’s cool
then the front of the liner it’s it’s lean and it’s a dual feed liner if you
look around here all these two area it’s made of like a neoprene like ER I don’t
know the name of these but it’s expandable basically all these recall
liners are dual feet so for me I’m a size 43 but if I’m a fat if I would be a
size 44 I could use the same also in the front of the line I wear this thing
where it says the name of the liner that you can put the period you can put the
buckle going through this this little thing I don’t know the name of this see
this if the buckle goes through here the tongue will stain the in the same
position so there won’t be any spinning then with the lacing works quite cool
the material in the middle of the liner in this region of the liner here just
the top it’s I don’t know to explain this kind of like velvet it’s cool why
is it like this because somehow these slides and these will make I don’t know
I don’t know why they made this material I’m sorry I wanted to say that I don’t
know you see this little different shade of like here and here
so these two edges they’re supposed to protect the liner these and these is
supposed to protect the liner from the cuff bolt that’s also cool in my opinion
top of the liner is also only a little bit of stitching here and the stitching
is all flat so these means that there won’t be pieces of the ladder sticking
in your foot because it’s flat basically it’s super slim in front and
like the front of a Fat Boy the new Fat Boy liners which are dual fit that’s
cool like slim liner slim looking liner it doesn’t have any lacing or tongue
moving until middle of the liner then from off of the liner to the back that’s
when the tongue is lacing that’s it I think the main thing about this liner is
really the foams that is made with it will adapt your food it’s a technology
that used to be used by Solomon Solomon as that in the liners and I know that
everyone used to love the soluble liners so the technology used in these is the
same it has a little bit of a v cut like not too deep just a little v cut in the
back it’s a lycra material here which is a little bit different of the inner
material more like it’s a little more elastic it has these liner older for you
to all your escapes ah important the inner sole of these liners it’s super
sleek if you need shock absorbers you might need to use it underneath the
liner I wouldn’t put it inside I would put it outside the liner in between the
liner and the shell boot I would put it here not inside and that’s it I try to
show you a little bit of what these liner is I think this man is not out yet
I am Not sure I know that some skates already come with this liner like the
powerslide v trinity skate comes with this liner I know that my feet will F DS
liner in the aftermarket should be out any time
if it’s not out yet so look for my feet recall liner in my opinion is one of the
best planners in the market right now it’s I like to just a little bit of read
most of it is black I don’t think this one will be in all the other colors like
the Fat Boy at least for now but I do know that the ones that come on them on
the powerslide V Trinity escapes come at least in white and in hold black I do
not know what colors they will come out in the aftermarket but to go to school I
like this one that’s it I hope you enjoyed this video if you did enjoy
these videos don’t forget try to the channel give me some thumbs up if you
liked it give me some thumbs but if you didn’t you subscribe to channel right if
you didn’t see where do it now oh because video guys cheer see you soon

Tagged on:                                                                                                                     


  • July 24, 2017 at 1:33 pm

    i thought you meant there was a product recall lol

  • July 24, 2017 at 2:36 pm

    nice bots i like but not found the prices :(((

  • July 24, 2017 at 2:55 pm

    Do you think it's better than skinny boy liner that are in the Aeon Pro models?

  • July 24, 2017 at 4:04 pm

    I need one. The razors stock liner gets thin lol maybe because i skate almost every day.

  • July 24, 2017 at 6:12 pm

    For me the laces is the best features in this liner 😀

  • July 24, 2017 at 10:50 pm

    Oh the recall…I fell for it too. But! I am very interested in looking to replacing my liner to my Valo v13s to something a little more custom but not break the bank. Thanks Lino as always for the educational video. It's helpful to all of us make the right skate decisions for our own needs and wants. Not to mention not make bad choices. (Fat boys sure won't fit my v13 shell)

  • July 31, 2017 at 4:45 pm

    Hey lino, been watching a lot of your video's. Can you recommend a new liner for Valo v13? The one they come with is too hard for my skinny ankle

  • August 30, 2017 at 1:29 am

    Hey I'm a Ricardo as well, but as my middle name! Awesome Channel.

    Two questions, How tall are the recall compared to Fatboy Hi Liner?
    Also I'm learning more about insoles like the superfeet yellow and what not. Its important to support your arch. Do you know anything about this? maybe an insole video should be next.

  • November 6, 2017 at 5:19 am

    How do these compare to the Skinny Boy and 2nd Skins?

  • December 18, 2017 at 7:30 pm

    this liner is FAT? like Fat boy? cause i need liner for SEBA FR shell. it will work, not to slim??


Leave a Reply

Your email address will not be published. Required fields are marked *