¿How are you future youtube legends? Welcome to a new and wonderful episode of JuanPedroTV People are always asking me to build stuff and i love to build stuff! But it takes a lot of time This video took me 3 days to be finished but im so excited with the outcome One of the youtube channels i like to see the most is Braille Skateboarding They’re a skate channel and they have a section called “You make it we skate it” So as an apply to their show i made an skateboard to send them, and is made of PVC! and here is the outcome! and im so extremely happy! If you look closer you could see the details, is made of layers of PVC stuck together with PVC glue This is not as simple as it seems, i put the trucks on and i left the PVC letters at the middle of the board so it looks like its PVC if i had painted it would not seem like it And i put the griptape on, and it was the first time i have done a griptape job so nicely These are some of the details on these kind of projects that i didn´t know This things you see here, you will be asking “what is this guy talking about?” well as it says in some of the little papers, this one says “resin” the other one says “cold glue” and the last one says PVC glue” This is a glue test so i got all the glues on a piece of PVC i put them on a Hydraulic Press for a night and the next day i tried to pull them off The resin teared off, the cold glue teared off and i cant tear off the PVC glue yet So this is what i chose to stick the layers together i wont tell you more in this presentation, so let’s see how i did it! The first is to cut the PVC tubes from the bottom to the top This is a very fast process if you use a jig and it did a great job its not necessary to cut them super straight now we will use this heat gun and i will use this flat beak so the heat disperses in a better way over the plastic Then we will start to heat the pastic on the inside and the outside and i used some wood planks to create some space so the tube can open so i put heat on it until it deformed, this was the most tedious and stressful part because it was so hot outside and the pistol was at 300 celsius one, two, three, four layers of PVC stretched out, this took me two and a half hours and now will do the next: We will use one and put a penny board on it, and the we will use a marker to draw the borders and then cut them of that size so when we put the pressure on it there will be less material so we will be able to see better then we are using the jig to cut the skate, this part was so easy there are 3 to go I found a piece of wood that I wil cut in half so I can use it as a “sandwich” That will let me press all the skate layers together and there, I set fire on the BBQ or “Chulengo”(a gas tank cut in half). I´ll let it heat up and then I´ll put each PVC layer on it for a while. Till they get really soft

HAZ TU SKATE CON TUBOS DE PVC
Tagged on:                                                                                                                                                         

100 thoughts on “HAZ TU SKATE CON TUBOS DE PVC

  • December 30, 2018 at 1:25 pm
    Permalink

    Sos épico ♡ .. Te salió bien

    Reply
  • January 2, 2019 at 3:20 am
    Permalink

    Crack el primer truck esta mal colocado

    Reply
  • January 4, 2019 at 3:15 am
    Permalink

    Min 8:40 jajaja que atrevido :v

    Reply
  • January 6, 2019 at 12:32 am
    Permalink

    Sortea

    Reply
  • January 7, 2019 at 6:01 am
    Permalink

    La música de lisofort o como mierda se lllame

    Reply
  • January 9, 2019 at 12:19 am
    Permalink

    E chiquillo es chileno po culiao

    Reply
  • January 9, 2019 at 4:02 am
    Permalink

    8:06 XD

    Reply
  • January 10, 2019 at 2:41 pm
    Permalink

    Que buena, medio trabajo pero debe ser muy satisfactorio saber que lo hizo uno

    Reply
  • January 12, 2019 at 10:07 pm
    Permalink

    De que país SOS?

    Reply
  • January 14, 2019 at 7:29 pm
    Permalink

    Y lo más gracioso es que lleva un eje al revés

    Reply
  • January 16, 2019 at 11:37 pm
    Permalink

    Y para q quiero hacer un skate de pvc? Nadie en su sano juicio lo haría

    Reply
  • January 18, 2019 at 9:25 am
    Permalink

    Tail is too high

    Reply
  • January 19, 2019 at 6:36 am
    Permalink

    sos chileno ?

    Reply
  • January 21, 2019 at 11:52 pm
    Permalink

    deberías hacer la patinete más grande a ver si soporta el peso

    Reply
  • January 24, 2019 at 2:53 pm
    Permalink

    Conntrulle

    Reply
  • January 25, 2019 at 6:07 am
    Permalink

    Che alguien se dió cuenta que el track de adelante está mal puesto?

    Reply
  • January 29, 2019 at 1:33 am
    Permalink

    es una peni :v

    Reply
  • February 1, 2019 at 8:03 pm
    Permalink

    pvvta pense que tu ropa estaba hecha de pvc

    Reply
  • February 2, 2019 at 2:51 am
    Permalink

    Eres chileno???

    Reply
  • February 5, 2019 at 8:20 pm
    Permalink

    Que Tal amigo.soy un Seguidor de su excelente trabajo he creado mi canal de salud pero me gustaria tener un consejo de su parte y si puedes subcribirte por fa..Apenas estoy iniciando y me gustaria obtener sus consejos…valiosos

    Reply
  • February 8, 2019 at 2:29 pm
    Permalink

    Tengo 13 años y me encanta crear como vos,nuevo sub.

    Reply
  • February 8, 2019 at 2:38 pm
    Permalink

    Leña para…

    Reply
  • February 8, 2019 at 11:30 pm
    Permalink

    Muy buen vídeo

    Reply
  • February 9, 2019 at 1:34 pm
    Permalink

    No es un skate es un peny

    Reply
  • February 10, 2019 at 3:25 am
    Permalink

    Eso no es un skate es un lonb

    Reply
  • February 10, 2019 at 6:32 am
    Permalink

    Wm cagao comprale una mejor fkkdkd

    Reply
  • February 12, 2019 at 4:27 pm
    Permalink

    &diego

    Reply
  • February 15, 2019 at 10:29 pm
    Permalink

    Eso es un penny board

    Reply
  • February 17, 2019 at 6:50 am
    Permalink

    Fjkekw

    Reply
  • February 17, 2019 at 9:23 pm
    Permalink

    Es una buena idea para vender.

    Reply
  • February 19, 2019 at 4:04 am
    Permalink

    Oye soy de Chile y bo

    Reply
  • February 19, 2019 at 11:30 pm
    Permalink

    Que divertido!

    Reply
  • February 21, 2019 at 1:01 am
    Permalink

    Like si lo hiciste y te quedó genial

    Reply
  • February 21, 2019 at 8:33 am
    Permalink

    Ya cabron hable bien :v

    Reply
  • February 21, 2019 at 9:43 pm
    Permalink

    Emmm no se pero creo que se desarma el skate para crear una mierda de pvc

    Reply
  • February 24, 2019 at 5:49 am
    Permalink

    Wena !!!!

    Reply
  • February 28, 2019 at 2:39 am
    Permalink

    Yo le hubiera puesto ruedas más gruesas de street

    Reply
  • March 1, 2019 at 1:53 am
    Permalink

    Es de chile o argentina??

    Reply
  • March 5, 2019 at 3:42 am
    Permalink

    El weon puso el eje al revez dlddlldlx

    Reply
  • March 6, 2019 at 5:03 pm
    Permalink

    Está malardo la tabla

    Reply
  • March 8, 2019 at 12:44 am
    Permalink

    Hasta tu canal está hecho de PVC

    Reply
  • March 9, 2019 at 2:39 am
    Permalink

    Fácil de hacer!

    Reply
  • March 12, 2019 at 9:34 pm
    Permalink

    Puso los ejes mal

    Reply
  • March 19, 2019 at 12:20 am
    Permalink

    Yo solo le puse 4 llanta y una tabla de madera:v

    Reply
  • March 23, 2019 at 3:20 pm
    Permalink

    Tiene los ejes al reves

    Reply
  • April 4, 2019 at 7:03 am
    Permalink

    Me ha servido mucho la idea, y es más barato que comprar una tabla, sigue así

    Reply
  • April 7, 2019 at 4:11 pm
    Permalink

    Hace eso mismo pero no una penny un skate para trucos

    Reply
  • April 8, 2019 at 9:31 pm
    Permalink

    Ahora vuélvelo eléctrico
    Nice joob

    Reply
  • April 11, 2019 at 1:20 am
    Permalink

    Pusiste mal Los ejes

    Reply
  • April 11, 2019 at 2:00 am
    Permalink

    Que maestroo, saludos a todos y a mi ex que me mira por el face ✌️

    Reply
  • April 11, 2019 at 3:21 am
    Permalink

    @sergio lucea llamado para que lo haga

    Reply
  • April 13, 2019 at 7:22 pm
    Permalink

    Eso es un penny cabron

    Reply
  • April 15, 2019 at 1:43 am
    Permalink

    esta genial

    Reply
  • April 20, 2019 at 8:37 am
    Permalink

    Muy buena! El pvc es un caño! Jaja

    Reply
  • April 21, 2019 at 11:26 am
    Permalink

    Loco que buen contenido! de lo mejor de YouTube en mi humilde opinión.

    Reply
  • April 23, 2019 at 9:08 am
    Permalink

    Te quedo chido

    Reply
  • April 23, 2019 at 3:53 pm
    Permalink

    Yo tengo una

    Reply
  • April 26, 2019 at 6:51 pm
    Permalink

    8:16 truck da frente está errado

    Reply
  • April 28, 2019 at 9:57 pm
    Permalink

    Dudo entre si sos Argentino, uruguayo o chileno jsjssj

    Reply
  • April 30, 2019 at 2:05 pm
    Permalink

    Por que no pusiste unos trucks en tu Penny y le mandas a los gringos

    Reply
  • May 1, 2019 at 3:14 am
    Permalink

    Men! pusiste el truck al reves xD 7:46

    Reply
  • May 1, 2019 at 11:38 pm
    Permalink

    Puedes hacer un skateboard? Ya que lo que hiciste es un longboard

    Reply
  • May 10, 2019 at 6:41 pm
    Permalink

    Like si te diste cuenta que en el minuto 8:05 los trucks están al revés y también hiso una penny no un skate

    Reply
  • May 13, 2019 at 2:15 am
    Permalink

    Y donde conseguiste las gomas viejito ???

    Reply
  • May 20, 2019 at 7:01 pm
    Permalink

    cuando la probaron
    https://www.youtube.com/watch?v=vmT4-p7AzFI

    Reply
  • June 3, 2019 at 1:58 am
    Permalink

    esa vola en penny board weon

    Reply
  • June 3, 2019 at 5:19 pm
    Permalink

    Estava intentando aser una pero no pude ni mierdas jajajajajaja

    Reply
  • June 8, 2019 at 1:55 pm
    Permalink

    De PVC que hijo p*** 😂🤣😂🤣

    Reply
  • June 9, 2019 at 10:12 am
    Permalink

    Muy chulo el video!! Quiero Mas Como Esto Etubo Muy Buenoo!

    Reply
  • July 2, 2019 at 1:00 pm
    Permalink

    Malísimo tu skate

    Reply
  • July 4, 2019 at 5:05 pm
    Permalink

    El eje frontal esta del revés… (aunque lo cambiará después)
    Y no es un skate es un peny
    Y las ruedas si son de skate pero para el peny se utiliza para moverse y no trucos ya q no tiene nose y el peny no suele llevar lija

    Reply
  • July 14, 2019 at 5:11 pm
    Permalink

    8:05 la reaccion que hdp… jhahjajaa{

    Reply
  • July 19, 2019 at 4:21 am
    Permalink

    Puso el eje al revés

    Reply
  • July 20, 2019 at 7:08 pm
    Permalink

    Notable la reacción de la señora "que hijo de p…" 😄
    Excelente video, espero poder hacerlo algún día!

    Reply
  • July 21, 2019 at 5:55 pm
    Permalink

    Wena wena genial saludos

    Reply
  • July 22, 2019 at 3:18 am
    Permalink

    7:20 en México lo conocemos como cuter

    Reply
  • July 22, 2019 at 6:02 pm
    Permalink

    Like site diste cuenta de troks
    Antes que lo arreglaron

    Reply
  • July 23, 2019 at 3:09 am
    Permalink

    El pvc es nocivo para la salud por lo tanto a tu familia ya le dio Cancer, por ablandar tu patineta en la parrilla

    Reply
  • July 23, 2019 at 1:33 pm
    Permalink

    Buena wn , quedó bkn

    Reply
  • July 25, 2019 at 5:32 pm
    Permalink

    Muy bueno hermano esta bacan sigue asi

    Reply
  • July 28, 2019 at 4:36 pm
    Permalink

    Saludos desde Venezuela excelente fabricación, me gustaría un asiento de moto para caffe racer..

    Reply
  • July 29, 2019 at 10:38 pm
    Permalink

    2019 in the HOUSE!!

    Reply
  • July 30, 2019 at 6:31 am
    Permalink

    No se para que vwo esto si ya tengo skate xdd

    Reply
  • August 7, 2019 at 3:13 pm
    Permalink

    Hola! Hacerlo con alto impacto en vez de los caños de pvc funcionaria?

    Reply
  • August 11, 2019 at 5:45 pm
    Permalink

    Estos vídeos eran los que me gustaban Juan Pedro tv. 2019

    Reply
  • August 14, 2019 at 8:13 pm
    Permalink

    7:50 Alguen se dio cuenta que puso el track de adelante al revez?

    Reply
  • August 16, 2019 at 2:10 am
    Permalink

    Pusiste los ejes al reves men

    Reply
  • August 17, 2019 at 7:59 pm
    Permalink

    El nene ni andar sabe

    Reply
  • August 18, 2019 at 4:41 pm
    Permalink

    Si yo lo voy hacer con pistola de calor una cortadora ladrillos y todo eso para eso lo compro pero buena Capó

    Reply
  • August 19, 2019 at 3:04 am
    Permalink

    like si separese a ricardo for

    Reply
  • August 21, 2019 at 9:30 pm
    Permalink

    Huele a bullying

    Reply
  • August 22, 2019 at 12:28 am
    Permalink

    Like si sabes donde vive

    Reply
  • August 22, 2019 at 11:14 am
    Permalink

    C0NfirmaD0 , tus padres son hermanos/primos

    Reply
  • August 22, 2019 at 11:53 pm
    Permalink

    Puso mal el eje

    Reply
  • August 23, 2019 at 4:34 am
    Permalink

    No sale mas Fácil comprar una?

    Reply
  • August 24, 2019 at 3:11 am
    Permalink

    Que hijo de…

    Reply
  • August 24, 2019 at 3:39 am
    Permalink

    no es un skate

    Reply
  • August 25, 2019 at 5:39 pm
    Permalink

    I think that is a better idea try to buy a skateboard no?

    Reply
  • August 26, 2019 at 4:35 pm
    Permalink

    Ricardo fort??

    Reply

Leave a Reply

Your email address will not be published. Required fields are marked *