Hello, it’s nice that you tuned into thuskochtour again. My two daughters are huge fans of Soy Luna and wanted a Soy Luna cake for a long time. Today I want to show you the 3D cake topper and next week there will be the complete cake. Now I will show you what you need for the roller skates: You need:
Pink modelling clay Yellow modelling clay blue modelling clay black modelling clay White modelling clay The cutting template consists of 3 patterns. The shoe sole, the tongue of the shoe and the shoe itself that I will double. First take some pink modelling clay, colour it with brown paste colouring and cut out the shoe sole with the pattern. Then stick on the brown heel and the other roller skate components in black modelling clay with some sugar glue. Then model axes. To stabilize the axes use a tooth pick and let it dry. Now model the wheels with yellow and pink modelling clay. Cut out a circle and a smaller circle inside, stick it on with sugar glue and let it dry as well. Then roll out the pink modelling clay with a thickness of 3mm. Take the cutting template and trim it twice. Put the pattern aside and stabilize the shoe with modelling clay in the front, at the back and in the middle. Cut out the tongue with pink modelling clay and stick it on. Now stick on the pink shoe pattern around the sole and trim the leftover. Now cut out the blue modelling clay for the bands in the front and back and stick it on. To stabilize the shoelaces, stick on a strip on the edges. Now use a stamping tool to make the seam. Take a small nozzle and stamp out the holes for the shoe laces. Take some blue modelling clay for the rings and stamp out small rings and stick it into the holes for the laces. Then modelt he laces with yellow modelling clay and stick them on from bottom to top in turns. Then model the zick-zack pattern with white clay. And now paint on the remaining decorations for the shoe. Attach the wheels with the axes, stick it on and paint the screws with silver colouring. Finally model the stopper and stick it on the bottom side of the shoe. And now the Soy Luna roller skates as cake toppers are done! You can prepare the shoes very easily but they need to dry for 1-2 days after being completed. I hope you liked this video and don’t forget to turn in next week for the entire Soy Luna cake!! Bye

[ENG-SUB] Soy Luna Roller Skates/ Soy Luna Rollschuhe/ 3D Cake Topper
Tagged on:                                                                                                                                                             

10 thoughts on “[ENG-SUB] Soy Luna Roller Skates/ Soy Luna Rollschuhe/ 3D Cake Topper

  • September 3, 2017 at 11:39 am
    Permalink

    Schönes Video😍

    Reply
  • September 3, 2017 at 8:23 pm
    Permalink

    Unglaublich was du immer hinzauberst!! 😍😍

    Reply
  • November 5, 2017 at 8:23 pm
    Permalink

    Super geworden 😊wo hast du deine Vorlage her?

    Reply
  • December 24, 2017 at 2:00 pm
    Permalink

    Hallo! Wie sind denn die Maße für die Vorlagen? Danke und frohe Weihnachten!

    Reply
  • December 30, 2017 at 8:42 am
    Permalink

    Té moche

    Reply
  • March 25, 2018 at 7:54 pm
    Permalink

    Du soltest echt eine tortendiseinerin werden oder torten laden eröfnen.😘

    Reply
  • August 18, 2018 at 3:08 pm
    Permalink

    Wow

    Reply
  • June 18, 2019 at 10:22 am
    Permalink

    Carsten ich bin auch schon oder Stan Juni an den Geissens Kinder Geissens 13 falsch 31 ja und ich bin auch schön Bruder von soy Luna und ich will auch schon Torte

    Reply
  • June 18, 2019 at 10:22 am
    Permalink

    Annabell

    Reply
  • June 18, 2019 at 7:13 pm
    Permalink

    Voll gut

    Reply

Leave a Reply

Your email address will not be published. Required fields are marked *