Do you think it’s possible to add a headphone jack to an iPhone 7 I’m Scotty with Strange Parts. You probably know me as the guy who built his own iPhone in China I’m here in Hong Kong in front of the Apple store And I came down here a few months ago To buy a new iPhone 7 because I want to shoot better video when I’m out exploring the industrial world But I was really annoyed it doesn’t have a headphone jack and I really want one so I was stewing on it And I was stewing on it because I know Apple’s not gonna add it back But I did end up buying one and I went home and I woke up the next morning And I thought why don’t I have my own headphone jack how hard could it be now other people have tried doing this Don’t do that it turns out it’s really bad for your phone. I want to do it for real is it possible I? I don’t know I’m gonna head to Shenzhen and find out I’m here in Shenzhen, the electronics manufacturing capital of the world. We’re here in Huaqiangbei Which are the electronics of wholesale markets and you can get just about anything here I need a phone I can take apart, and I don’t really want to take apart the nice shiny one I just got at the Apple store So I looked around for an iPhone 7 logic board that I could use to build up my own phone And I’m not really finding very many so instead I bought a used phone This is my screen cracker. See if we can open a gap down here where we can get either our fingernail Or a tool in there Yep. There we go. You can see there’s not a whole lot of empty space in this phone, a little bit extra room But not much. I wanna know what this thing is here Because that’s where the headphone jack would have gone So iFixit says according to Apple, The, this little plastic thing in the corner is a barometric vent in order to have an accurate altimeter that’s Just a piece of plastic. Yeah, I don’t I don’t believe that that’s a barometric event I don’t really know what I’m talking about it Just looks to me like a plastic clip that holds some connectors on. Here is the headphone jack if this was in here Would it fit? Oh, it would it might? Might stick out a little. Wonder how much I can cut this down without So Holy shit, I was expecting to say that there’s no space here, and I don’t think that’s true I thought it was gonna look like that where I was gonna have this big bulge on the outside But now I think I could put it on the inside. I don’t want to change the case at all I just want to drill a hole I Didn’t think that was possible. I didn’t think there was enough room inside, but I think there might be. That’s kind of crazy I’m on my way to the markets to get a dremel to grind out more room in the case Okay, I think that’s what I want. Let’s see if that’ll work This right here is, where I want to put the headphone jack This goes here, battery will go up here. So this Now it needs a hole to come out through. Right here That is getting pretty far out there The taptic engine is still in the way, maybe I can move the battery up oh I am a lucky bastard I can totally Just put the taptic engine in sideways so battery just a little higher It sits right up against the top of the logic board which I think is fine It’s totally cockeyed, but it works I’m starting to get really worried about the vertical space. That’s fully flush on that corner, but over here. It’s sticking up That’s a pretty big problem. So this is the bottom of the screen, that’s the that’s the button this Bracket right here goes right on top of where we want to put the headphone jack. Let’s start taking that off That is very close to at least allowing at the top connector to fit in if I grind off the corner Man, now there are problem with the connector is getting unplugged It’s these two connectors right here that are giving me the problem. That’s really hard to show this but they both sort of Come together like right in the same area, and I’m worried They’re colliding with each other so it does, does work it comes Pretty much flush at this point, but I’m worried that that pressure is popping that connector off. The other option I was thinking about is if I can move this connector over far enough, then this actually can go on the bottom again I’m not sure if that’s gonna fly I’m getting ahead of myself though. First, I just need to get the electrical side of things working I thought maybe I’d get lucky, and I’d find a place inside the phone that I could just wire up a headphone jack to and After doing some research online and talking to people. I don’t think that’s the case, so I’m gonna have to get clever I started thinking about this headphone adapter that Apple gives you with your phone It’s got a lightning plug on one end and a headphone jack on the other and then we thought Could I wire that into the back of one of these lightning jacks like this and then have the headphone adapter stick out the front So I’ve come to the Apple store here in Shenzhen It’s the only official Apple store run by Apple to get some more official adapters (Want buy this?) yeah, I want to buy this yeah Okay, thank you. Well that was pretty easy, not cheap, but easy. Let’s cut this open That might… I just broke something. Yeah damnit. That might have been bad That’s bad. Dang it. should have bought more than one Hi, you guys have lightning to headphone adapters? (Yes) I didn’t see it here. Oh, it’s Perfect, need a couple actually. I’ll take three. (Three) Yeah, I keep breaking them 200 and 36 But, do you need a receipt for that, in case it has some problems? Although it’s very… I think it’s okay I think the next step is for me to try and solder wires on to the back of a Lightning jack And onto the headphone adapter, and then try and connect them together But this is finer solder work than I’ve ever done So I went to my favorite tool booth in the markets and I got their fanciest tweezers. This one okay, this one good, and this one the best Switzerland fetus, and they come in a tube, which means they’re extra fancy Switzerland fetus, and they come in a tube, which means they’re extra fancy Good. Super nice guy High temperature, okay High temperature sounds good (What do you want?) Maybe I’ll get red, the high temperature, yeah My $10 USB microscope is total crap so it’s time to go get a new one So that was a typical, but amazing experience. She took everything out of the box, showed me how everything went together Debugged it all just to prove everything works and make sure I have no problems Here goes nothing This is what I’ve been working on for far too long now, well over a week at this point. This is the lightning dock that would go in the bottom of an iphone 7 I’ve soldered wires on the back of that to each of the pins to this breakout header here. This is my taken apart lightning to headphone jack adapter. I’ve just taken all of the pins on the Lightning jack And I’ve attached them to these header pins here. The next thing to do is to connect them together This is exactly the same thing It’s just plugging the adapter into the Lightning jack But it’ll just test the dock that my wiring right before I start trying new things. Here it goes Yes, it works Nice Now I need to figure out how to charge the phone. If I’m gonna wire up this headphone adapter instead of the Lightning jack Then the Lightning jack won’t be connected anymore, so I got to figure something else out We’re just talking with some friends over beer and street barbecue tonight And and I’ve been telling what I’ve been working on and struggling with and They suggested that I make my own circuit to just switch between the Lightning jack and the headphone adapter Apparently there are chips that can switch USB, so maybe something like that will work I think I found a chip that’ll work. I’m on my way to the markets to meet a chip broker that a friend recommended Ni hao. Are you Andy? (Yeah) yeah Scotty, nice to meet you. Oh, you got em already ready? (Yeah) perfect I just want to give a quick explanation of what’s happening here This is the headphone adapter, and this headphone jack will stick out of the phone This is the Lightning jack that you’ll see on the outside of the phone And then this is where it’s all connected to the phone where the Lightning Jack used to be connected And then this is the switching chip that switches between Connecting the headphone adapter to the phone or the Lightning jack to the phone Depending on whether something’s plugged in to the Lightning jack or not. Here goes so let’s start by putting the Lightning jack in. First test, do the headphones work. It says iPhone, right? Plug this guy in. Now it says headphones sweet Amazing holy shit it works Okay, now here’s the real test. Can i switch over to the other jack Okay, headphones are connected. Now let’s switch it to one and bingo headphones, again, charging Headphones, plug in, charging Headphones, I think I got it Yes. Time to make a circuit board. Really excited to get this point Next, I need to figure out how to get this inside of here Originally, I thought I’d be able to hand wire it, but I think things are way too complex for that now So I’m gonna make a printed circuit board or PCB. You’ve probably seen these before They look really complex, but they’re really just a bunch of wires glued on to a rigid piece of fiberglass and The cool part about these is that I can draw them on the computer and then have a factory make a really precise copy The first circuit bar to make isn’t not gonna fit inside the phone. It’s gonna be way too big I’m gonna use big chips that are really easy for me to solder I’m gonna add lots of test points to make it easy to debug and then I’ll use what I learn from this To design a much smaller board that will fit inside the phone Okay Finally done designing the circuit board. I’m exhausted I’ve been working on this for the past two days. Hopefully I didn’t screw anything up too badly It’s about 10:30 in the morning here on a Sunday, and I just got the delivery Circuitboards. There, is our finished prototype board. Sweet, time to put it together Let’s give this a shot. You can put it together with the iPhone 6s, seven is still in the shop Oh no. So headphones don’t work straight out of gate. That’s not right Yeah i just totally wired these backwards Okay, well there’s probably an easy solution to this which is To remove the headphone jack and wire it up with the wires Right about now, I was hoping to say there it is the prototype is done, and it’s working But not so much. The only part that’s not working right now is this little guy, which is the Lightning to headphone adapter But, I have wired up the headphone adapter that I hand soldered, that I was using before for prototyping and I can get that to work. I think I’m gonna declare victory and move on Now it’s time to fit all this circuitry inside the phone. Now obviously this big board isn’t gonna fit So I’m gonna have to make a smaller one, a much smaller one I’m going to try making a flexible circuit board. Now these are the same as the normal circuit boards, except that instead of gluing the wires down to a rigid piece of fiberglass, They’re glued down to a flexible piece of plastic instead. This allows them to bend around other parts They used a lot in cell phones and cameras, where space is really at a premium They’re sometimes called origami circuits because they often have really complex folds I’ve never designed one of these before so we’ll see how this goes I Went got printer so that I can figure out whether the flex PCB design fits as drawn on the computer inside the phone Time for a little ghetto lamination I’m going to the markets to see Lisa, who is my contact at the flexible circuit board Factory. Hi, how are you? So this is an iPhone 7. I am adding a headphone jack (Oh, you change it? you change the phone?) Yeah, yeah, so that’s what this board does (Okay, good one) *laugh* This is my first flex PCB design, so I want to make sure I’m not making any major mistakes (You just need one piece). I probably should get like at least five pieces just in case, I have five or ten pieces just in case I’ll have problems Yeah, and I’ll send you the file when I’m done. Hopefully the end of today. I’ll get it to you Thank you. Good seeing you Lisa. Good seeing you Nana. Okay, bye-bye. Feeling pumped up again Things are moving forward finally Alright, I just sent files off to Lisa and she said she got em. So just waiting on them to make the make the actual boards now. I’m super excited I’m rushing over to meet Lisa to go out to the factory. All right, so we’re here at the FPC factory Let me give you a quick overview of what we’re gonna see before we go into the factory Remember I said that circuit boards were just a bunch of small wires Well they etch those wires out of a sheet of copper using acid. First we need the copper That’s gonna become part of our circuit board. They cut it off a roll It’s actually two sheets of copper with a layer of special plastic in the middle Next, they drill any holes the board needs they use these really cool robotic drilling machines, which can automatically switch between different sized drill bits Wow, it’s super strong smelling in here Okay, so it’s for copper plating the vias When they drill a hole, then they need to fill the hole back in with copper so it conducts between the two layers They then run it through these machines which edge off all of the rest of the copper, leaving only the wires I’ve drawn Now it’s time to make the solder mask. The solder mask is another layer of plastic that Covers up the wires where I don’t want solder to stick when I go to solder on the chips This is the, some screening room here where they’re putting on the silkscreen for any numbers or letters or writing that needs to be on the board Gradual stacking up of a layer of Sandwich We’re testing all of the electrical contacts everything that should Connect, connect and things that shouldn’t connect, don’t connect every time a board is made Then we need to make the tool, a test tool for it Finished? Okay, that’s the whole process Great. And finally they ship out the boards to the customer That’s me. So Lisa just texted me on WeChat and said that the Flex PCB boards are done. Hoping this board just works If it doesn’t it’ll be at least a week’s delay maybe more Hi, Lisa. How are you? Good, oh, you’ve got them right in your hand Awesome, yeah Yeah, they look good. I got the boards and I’m super-psyched. Big question now, is do they work and can I solder them. I’d be lying if I I didn’t say I was at least a little bit worried, and this is the smallest soldering I’ve ever done So I’m hoping I can pull it off. So I’m gonna start with the cheap chips first I mean, I think the strategy here is to apply a little bit of solder paste this solder paste is A little tiny microscopic metal balls, solder balls suspended in flux in like a flux paste. Alright, I’ve got something everywhere. Now, when I apply the hot air, all of this, all of these little microscopic solder balls are gonna melt and Turn into a solid piece of metal Wherever they are so I’m trying to make sure it’s they’re all in the right places Surface tension is totally your friend when you’re doing this kind of stuff so I just want everything to be kind of connected enough that surface tension will pull it all together when it melts I guess let’s put the passives on first the little capacitors and stuff Okay now, Chips. All right these are the BGA chips, these are the ones that are the smallest and have a little solder balls on the bottom This could This could result in massive failure if I just blow all these chips everywhere, just want like a baby’s breath of hot air See everything moving around? That’s what should happen Boy that looks great. I think I’m gonna stop there. If that was actually it, that’s really darn simple Just looking for that everything got adhered properly and there aren’t any major Bridges between pins or pads. There it is, that’s our little set of chips here. Sweet Awesome. Next step, the other side I will accept that, as Maybe working. So many things have to go right for this to work I’m nervous This is the moment of truth *music playing* How cool was that? Months of work finally coming through Headed over to my friend, Nick’s place He’s a mechanical engineer, and he just got a desktop CNC mill. CNC’s are super cool They’re basically super precise robotic drills So he’s gonna try and help me mill better holes in the case for the headphone jack And what I can do by myself just with a handheld dremel You got a proper lab in here I can set up the basics of this, okay I’m still figuring out how to use this software so It’s gonna sit like this, right Yep, so and the important measurement is the height of the hole from this face. Okay, So it’s doing a helix, and then these blue lines or yeah, just cuts. I’m gonna load the g-code Just try it. Yeah, let’s give it a shot one of these one of these spare backs I hope this isn’t a bad idea. Alright, here goes nothing *drill working* Well, I don’t think our feeds and speeds were ideal. There’s definitely a lot of vibration going on Oh man, I wonder how many like Noob things we did all in one go I’m gonna Cut out the inside now, and that’ll allow us to actually like test fit the the Jack and see if this all works There goes, oh shit. I guess we’ll have to have a 2.0. Oh yeah totally – The box is destroyed
– But it still– It’s got a sticker on it
– I looked it up on Taobao, and they’re about ¥180, so…
– Yeah. Cool. So we picked up this xbox360 controller So we picked up this xbox360 controller Now it works with Mach 3. Cutting plastic like a video game. Yeah, I really want one of these now Looks a lot better than first time we tried this. It was a lot less terrifying than last time. That looks pretty damn good I think. It almost looks like we know what we’re doing now That’s, that’s beautiful. Next is to machine one of these headphone jacks Around the front to get that perfect circle so that it fits in the hole. Okay, So it looks like you hacked the shit of this connector Yeah I really did. So I took the dremel to it and basically just shaved it off until I hit metal on every side Okay, that’s enough That’s pretty damn good, I think that’s it Hopefully this case is the one. Time to go home and go to sleep Last thing I need to do is fit inside the phone, so Have it mounted here in the bottom the case. It’s one of the ones I drilled out by hand, and I just make sure that the screen fits on, still Pretty decent size gap there still. That’s a problem That’s… That’s real bad. It fits together, but the screens are breaking broken two screens in the past 24 hours, and they’re Just being too smashed i think, by the headphone jack I don’t know guys, I really want to give up at this point Just feels like now it’s a matter of not screwing up, not breaking something, which isn’t very much fun It’s also getting really expensive Hundreds and hundreds of dollars in broken parts. Like, just this week alone ignoring the rest of my costs I I knew this project was gonna be hard. I had no idea of how hard it was gonna be I’ve heard from so many AVU via emails Facebook messages, and a lot of you said how inspired you were, by, by what I did. And I wanted this story to be another story of inspiration, of success. And right now it’s not *beep* I really want to show you guys, like a finished phone. I really wanna be able to say here it is, it works *sighs* :(( Yeah, I can’t stop here. I’m gonna go give it one more shot and Be really careful this time. I feel like I’m gradually learning, how to not break stuff. It gets a little bit better each time but Wish me luck Finally got it working. I finally put it together Without breaking anything check this out. Okay? Here’s the speaker and Here Is the headphones. How awesome is that. Volume buttons work, Can pause it and play. And when I unplug the headphones, It stops. How cool is that and lastly the hardest part was getting it so that it would charge Check this out *TADA* 😄 That, is a pretty sweet sight. So one question you might be asking is how does this compare to an iPhone 6s, which was the Last model of iPhone that Apple made with a headphone jack This here is my old 6s, and you can see the headphone jack Here is a little bit closer in on the 6s, and lines a little bit further out And then my hole is a little bit more jagged than theirs um, but hey not too shabby for a handmade phone, right? But wait, there’s one more thing I’m sure a lot of you are asking how do I get my own iPhone with a headphone jack? Be patient I’ve already talked to a lot of people who want a modern iPhone with that phone jack and unfortunately. I’m not your Savior just yet. You can see how hard it was for me to put together with just this one phone This design isn’t quite ready for primetime. But for you diehard strange parts fans, I’ve made a limited edition board just for you Go here to find out more. Next, to Apple: I really want to buy an iPhone with a headphone jack in it from you. I I hear you’ve got a new phone coming out soon. So if you want help adding a headphone jack, let me know I’ll go one step further, if you’re an Apple engineer and you can email me any reasonable proof I’ll send you a free circuit board. I just want to help, guys. If you’re a strange parts fan, I need some help. Please comment below with what you’d like to see me do next. And if you think you’ve got a really awesome idea, Send me an email to tips at strangeparts.com I’m really looking forward to exploring outside of just cellphones and China I travel full time, so if you live somewhere interesting, or you’ve got an idea for an interesting story in an out-of-the-way place Chances are, I’m interested in going to check it out. Also to the brothers and sisters in Huaqiangbei and the broader cellphone ecosystem here in Shenzhen, You’ve helped me so much, so I have a gift for you I want to give you the design for this, no charge, to make and modify so many of you are way more skilled than I am, I hope that you can improve on this design and make it available to The average person. Believe me, they really want it I give you my full permission to make and sell these. The files are on my Weibo account and website here Also, I have some extra PCBs to give you, send me a message on Weibo And I’ll tell you how to get one. I hope that one day. We’ll feel like we truly own our devices That will feel free to modify and repair our phones as we please, to upgrade them and to add whatever features we can dream up Until then thank you for watching. I’m Scotty with Strange Parts, hit that subscribe button down below and stay tuned for more adventures Oh, and lastly I wanted to give a huge shout out to everybody that’s helped me with this video. Go check out the description there’s a lot of people doing really amazing things I know a lot of you are gonna ask can this be done on an iPhone 8, I don’t know. I haven’t seen one yet 😄

Bringing BACK The iPhone Headphone Jack – in China

100 thoughts on “Bringing BACK The iPhone Headphone Jack – in China

  • August 25, 2019 at 3:36 am
    Permalink

    the keys is " PATIENCE" awesome… :p

    Reply
  • August 25, 2019 at 9:52 am
    Permalink

    한국어 자막도 너어 주셔서 감사합니다!

    Reply
  • August 25, 2019 at 11:16 am
    Permalink

    Strange parts:>Bringing back the headphone jack in Iphone …… APPLE:>Am i a joke to you

    Reply
  • August 25, 2019 at 2:01 pm
    Permalink

    wait, you can't use headphones on the Crapho– Iphone7 ??

    Reply
  • August 25, 2019 at 4:44 pm
    Permalink

    @Strange parts can u get a icloud lock free iphone 5 motherboard and send it to me

    Reply
  • August 25, 2019 at 5:01 pm
    Permalink

    Warga +62 ikut komen

    Reply
  • August 25, 2019 at 7:42 pm
    Permalink

    ADAM BATTI AMK

    Reply
  • August 26, 2019 at 3:28 am
    Permalink

    Why doesn't he just build the iPhone i (infinity) THE INFINITE DEVICE WITH INFINITE POSSIBILITIES.

    Reply
  • August 26, 2019 at 3:43 am
    Permalink

    APPLE – THERE'S NO HEADPHONE JACK IN IPHONE 7
    Strange parts – HOLD MY DRILLING MACHINE

    Reply
  • August 26, 2019 at 5:47 am
    Permalink

    by the way apple layers are not looking for you

    Reply
  • August 26, 2019 at 7:05 am
    Permalink

    Chú giỏi quá

    Reply
  • August 26, 2019 at 8:01 am
    Permalink

    how much did you say your hair grows in two weeks?

    Reply
  • August 26, 2019 at 8:14 am
    Permalink

    Че бл?

    Reply
  • August 26, 2019 at 8:40 am
    Permalink

    And everything going to Sh** that why now Iphone X get released xd

    Reply
  • August 26, 2019 at 9:04 am
    Permalink

    This video is a pure gem.

    Reply
  • August 26, 2019 at 10:41 am
    Permalink

    actually the last iphone with a headphone port is the se not the 6s

    Reply
  • August 26, 2019 at 11:29 am
    Permalink

    23:37 cls63amg.dream car

    Reply
  • August 26, 2019 at 1:59 pm
    Permalink

    Samsong 😂 gooder

    Reply
  • August 26, 2019 at 6:05 pm
    Permalink

    Can u put two head phones in

    Reply
  • August 27, 2019 at 1:03 am
    Permalink

    Inspirador !

    Reply
  • August 27, 2019 at 1:41 am
    Permalink

    20:22 BA PEAO BA PEAO BA PEAO BA PEAO BA PEAO BA PEAO

    Reply
  • August 27, 2019 at 5:18 am
    Permalink

    Iphone kontole

    Reply
  • August 27, 2019 at 10:21 am
    Permalink

    What kind of microscope is that

    Reply
  • August 27, 2019 at 1:11 pm
    Permalink

    "How hard can it be" completely redesigns the iPhone 7

    Reply
  • August 27, 2019 at 2:44 pm
    Permalink

    Give away please

    Reply
  • August 27, 2019 at 2:45 pm
    Permalink

    Tell us u just bought a new an iPhone.

    Reply
  • August 27, 2019 at 4:09 pm
    Permalink

    In your face apple!

    Reply
  • August 27, 2019 at 4:43 pm
    Permalink

    Dude, you make things complicated. sell that to apple as revision to them.

    Reply
  • August 27, 2019 at 4:47 pm
    Permalink

    Suggestion, if you can add FLASH on Huawei Tablet M3, M5 & M6 model. Idk if that is simple, it really necessary to have flash. Ty.

    Reply
  • August 27, 2019 at 6:13 pm
    Permalink

    Moral of the story: start with a bigger chassis.

    Reply
  • August 27, 2019 at 7:28 pm
    Permalink

    Hi MR. I like your video…. Nice

    Reply
  • August 28, 2019 at 12:36 am
    Permalink

    I don’t think he knows but we have AirPods now

    Reply
  • August 28, 2019 at 12:58 am
    Permalink

    Awesome!

    Reply
  • August 28, 2019 at 1:53 am
    Permalink

    Deneng ana bahasa indonesiane ya

    Reply
  • August 28, 2019 at 2:24 am
    Permalink

    I don't see the point in this, people are annoyed with no Jack's because they can't charge and use headphones, but with his design it had to switch between the two so it wouldn't work at the same time anyway, given that it saves money on special ended headphones but for all the hastle and the cost of the parts with risk of breaking for something that does the same thing just with more holes it's pretty pointless,, anyway it's a cool video and I enjoyed it😂😂

    Reply
  • August 28, 2019 at 11:51 am
    Permalink

    terlalu rumit, di konector cas itu umumnya ada lima kabel, tinggal di cari aja yg di buat audio jack itu jalur yg mana, untuk sistemnya tinggal beli aja ligthning spliter lalu di tiru, atau dipindah chip lightning spliternya,

    Reply
  • August 28, 2019 at 12:19 pm
    Permalink

    T đã xem 3 lần

    Reply
  • August 28, 2019 at 12:49 pm
    Permalink

    Why not create a slightly larger phone-case with the circuitry and connectors inside?

    Reply
  • August 28, 2019 at 2:11 pm
    Permalink

    Fire the apple employee's which design the phone 😄

    Reply
  • August 28, 2019 at 3:50 pm
    Permalink

    Wow have Chinese.

    Reply
  • August 28, 2019 at 3:50 pm
    Permalink

    Let's be friends

    Reply
  • August 28, 2019 at 5:11 pm
    Permalink

    j u s t u s e a d o n g l e

    Reply
  • August 28, 2019 at 5:51 pm
    Permalink

    Helal olsun , ama Daha iyisini bizden birinin yapabileceğine inanıyorum. 🇹🇷

    Reply
  • August 28, 2019 at 6:14 pm
    Permalink

    Zwykły Polak z serwisu gsm opierdolił by takie złącze do iphona w godzine z wywierceniem otworu i lutowaniem

    Reply
  • August 28, 2019 at 6:20 pm
    Permalink

    Plz bring back audio jack on One Plus

    Reply
  • August 28, 2019 at 8:27 pm
    Permalink

    6:51 is that guy literally just shoving the other guy through the door?

    Reply
  • August 28, 2019 at 10:25 pm
    Permalink

    Tranquilos, tengo lo que estaban buscando, un comentario en español :v

    Reply
  • August 29, 2019 at 3:11 am
    Permalink

    2023: adding a lightning port to iphone 13

    Reply
  • August 29, 2019 at 4:01 am
    Permalink

    You amazing bro

    Reply
  • August 29, 2019 at 8:04 am
    Permalink

    Hahahaha

    Reply
  • August 29, 2019 at 8:16 am
    Permalink

    Now lets put a home button on a iPhone xsmax

    Reply
  • August 29, 2019 at 11:25 am
    Permalink

    Хуя,красавец)

    Reply
  • August 29, 2019 at 1:04 pm
    Permalink

    A Apple no le gusta esto xD

    Reply
  • August 29, 2019 at 1:34 pm
    Permalink

    Like documentary movie

    Reply
  • August 29, 2019 at 2:24 pm
    Permalink

    Paranormal activity 999..

    Reply
  • August 29, 2019 at 2:35 pm
    Permalink

    Or just buy a double dongel.

    Reply
  • August 29, 2019 at 3:13 pm
    Permalink

    Git air pods alsana

    Reply
  • August 29, 2019 at 3:14 pm
    Permalink

    Dikira saya bahasa Indonesia:v

    Reply
  • August 29, 2019 at 4:23 pm
    Permalink

    Da się? Da się 😁🤩

    Reply
  • August 29, 2019 at 7:46 pm
    Permalink

    Bro. U taught me that nothing is impossible.💪
    But work like this for the headline jack it's better to live with dongle😂😂

    Reply
  • August 29, 2019 at 8:20 pm
    Permalink

    Super cool Video!

    Reply
  • August 29, 2019 at 8:53 pm
    Permalink

    You were awsome to get this head phone jack back on the phone

    Reply
  • August 30, 2019 at 2:13 am
    Permalink

    Ok…video is cool…
    But i dont think that i am the only one who doesn't likes the thumbnail of his videos…i mean that typical thumbnail in every video, with a wide open mouth

    Reply
  • August 30, 2019 at 3:26 am
    Permalink

    RUET MEN URIPMU PAK DE….

    Reply
  • August 30, 2019 at 3:58 am
    Permalink

    damn. china 🇨🇳 stuff ain't cheap

    Reply
  • August 30, 2019 at 12:15 pm
    Permalink

    Great job

    Reply
  • August 30, 2019 at 12:56 pm
    Permalink

    Judul bahasa indo pas liat eh bule:v

    Reply
  • August 30, 2019 at 1:19 pm
    Permalink

    How much did this experiment cost

    Reply
  • August 30, 2019 at 3:58 pm
    Permalink

    Can you add it on OnePlus 7 pro

    Reply
  • August 30, 2019 at 7:34 pm
    Permalink

    I know where is that apple store it is in central apple store

    Reply
  • August 30, 2019 at 9:13 pm
    Permalink

    感謝您的付出
    很棒

    Reply
  • August 30, 2019 at 9:26 pm
    Permalink

    Next time they'll remove Charging Port and will sell it separately :/

    Reply
  • August 30, 2019 at 9:28 pm
    Permalink

    Ossam man…..great work…nothing is impossibel…..love you

    Reply
  • August 30, 2019 at 10:58 pm
    Permalink

    Great video. How much did the microscope cost?

    Reply
  • August 31, 2019 at 4:45 am
    Permalink

    신기하네

    Reply
  • August 31, 2019 at 4:46 am
    Permalink

    You can't charge and use the headphones at the same time. So basically there was no point in wasting all the time and money because using the headphones that came with the iPhone would have given you the same result. I just realized that after wasting 33 minutes of my night, lol

    Reply
  • August 31, 2019 at 7:51 am
    Permalink

    대단하다

    Reply
  • August 31, 2019 at 9:33 am
    Permalink

    you nailed it bro

    Reply
  • August 31, 2019 at 9:36 am
    Permalink

    make one on note 10+

    Reply
  • August 31, 2019 at 4:14 pm
    Permalink

    Can you plug in the charger and the headphone jack at the same time?

    Reply
  • August 31, 2019 at 4:40 pm
    Permalink

    Amazing dude …awesome

    Reply
  • August 31, 2019 at 5:02 pm
    Permalink

    you're amazing

    Reply
  • August 31, 2019 at 7:16 pm
    Permalink

    Russian translation would not hurt

    Reply
  • August 31, 2019 at 8:03 pm
    Permalink

    There are adapters for turning a lightning cable into a headphone jack and lightning cable

    Reply
  • August 31, 2019 at 10:47 pm
    Permalink

    you sound like Hugh Laurie from house / Stewart little great voice 3:03

    Reply
  • September 1, 2019 at 5:26 am
    Permalink

    Apple when the iPhone 7 came out we don't need a headphone Jack and know one can add one

    Apple when this video comes out …………………..

    Reply
  • September 1, 2019 at 8:42 am
    Permalink

    2019 be like. ill just buy some airpods.

    Reply
  • September 1, 2019 at 10:38 am
    Permalink

    Bravo un com français

    Reply
  • September 1, 2019 at 1:48 pm
    Permalink

    Hey bud just found this channel. what a dedication. keep it up bud! Godbless!

    Reply
  • September 1, 2019 at 2:10 pm
    Permalink

    Bro…. After watching ur dedication.. i got charged and straight away hacked 16 sites… Ur so motivational

    Reply
  • September 1, 2019 at 4:25 pm
    Permalink

    Im a fan of your determination.

    Reply
  • September 1, 2019 at 6:34 pm
    Permalink

    I give you 3000€ for that

    Reply
  • September 1, 2019 at 6:59 pm
    Permalink

    With all that, bro you could've just bought airpods 😅😅😅

    Reply
  • September 1, 2019 at 7:04 pm
    Permalink

    Add fingerprint scanner to iPhone X

    Reply
  • September 1, 2019 at 10:23 pm
    Permalink

    build a more customized android maybe a Motorola or HTC

    Reply
  • September 1, 2019 at 11:15 pm
    Permalink

    Wow, this guy deserves far more views and subs than most other popular YouTubers!

    Reply
  • September 2, 2019 at 1:12 am
    Permalink

    Big respect

    Reply
  • September 2, 2019 at 3:49 am
    Permalink

    ابل الحقيرة ترفض الاصغاء لمتطلبات الزبائن ولكنها تعرف ان زبائنها مجرد حمير يعبدونها

    Reply
  • September 2, 2019 at 4:08 am
    Permalink

    Excelente trabajo

    Reply
  • September 2, 2019 at 7:56 am
    Permalink

    hello.. i hope you can upgrade RAM for sony xperia phone.. I would be very happy if you could do it

    Reply

Leave a Reply

Your email address will not be published. Required fields are marked *